Download Print this page

LG LW6324 Series Owner's Manual

Hide thumbs

Advertisement

Quick Links

OWNER'S MANUAL
High Definition Network Camera
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
LW6324/LW6354 series
LW6424/LW6454 series
LW332/LW335 series
LW342/LW345 series
LW352/LW355 series
1111 (V1.0)

Advertisement

loading

  Also See for LG LW6324 Series

  Related Manuals for LG LW6324 Series

  Summary of Contents for LG LW6324 Series

  • Page 1 OWNER'S MANUAL High Definition Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LW332/LW335 series LW6324/LW6354 series LW342/LW345 series LW6424/LW6454 series LW352/LW355 series 1111 (V1.0)
  • Page 2: Table Of Contents

    Accessing the LG IP device..............5 SCENE mode setting (Option) ........36 LG Smart Web Viewer Overview ............6 Reset setting .................37 Configuration menu overview ..........7 Configuring the LG Network Camera Device ......8 Reference ..................38 Accessing the Configuration menu .........8 Troubleshooting .................38 System settings ...............8 Open source software notice ............41...
  • Page 3: Introduction

    Introduction The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual contains instructions on how to install and manage the LG Network Camera in your networking environment. Some knowledge of networking environments would be beneficial to the reader.
  • Page 4: Operation And Settings

    Microsoft Internet Explorer above the The LG Ipsolute VMS and the LG Smart Web Viewer program Web Browser version 6.0 and below the version 8.0. are the network program of the LG Video Server and the LG IP cameras. DirectX DirectX 9.0 or above •...
  • Page 5: Accessing The Lg Ip Device

    3.1 Start your Web browser. The IP Utility shows the MAC address, IP address, Model name and so on. 3.2 Enter the IP address of the LG IP device in the address bar of the browse. Note: 3.3 Enter the user name and password set by the The computer running the IP Utility must be on the same administrator.
  • Page 6: Lg Smart Web Viewer Overview

    LG Smart Web Viewer Overview Click to save the current image in JPEG format on your computer. 1. Click the [Snapshot] button and then the Snapshot window is displayed. 2. Click the [Save] button in the Snapshot window. 3. Enter the file name (JPEG format) and select the folder to save it.
  • Page 7: Configuration Menu Overview

    Maintenance Log & Report Displays the current surveillance live screen. You can monitor the camera Language image on the live view window of the LG Camera Smart Web Viewer. Stream Audio & Video Click this button and drag the area to use Audio PTZ function.
  • Page 8: Configuring The Lg Network Camera Device

    Configuring the LG Network Camera System settings Device Version The features and options of the LG IP camera are configured Displays the current version of Firmware, Hardware, Software and through the Configuration menu. Web Client. Only administrator-level users have permission to access the Configuration menu.
  • Page 9 Maintenance Time zone Set the time difference from GMT in the area where the IP device is installed. Select the time zone in the area where the IP device is installed from the drop down list. Time mode > Synchronize with NTP Server: Select if you want to synchronize the IP device’s date and time with those of the time server called NTP (Network Time Protocol).
  • Page 10 Notes: Log & Report • Backup and Restore can happen on IP device having the same version of firmware. This feature is not intended for multi-configurations or for firmware upgrades. • [Backup] function is allowed in HTTP protocol but not in HTTPS protocol.
  • Page 11: Audio & Video Settings

    If you change the CaptureMode option, the Privacy, WDR/ Language list BLC and HSBLC settings on the OSD menu are initialized. Select a language for the LG Smart Web Viewer configuration menu • Save: Click this button to confirm the settings.
  • Page 12 Stream > Stream quality: If the [Quality] option set to VBR, this option is displayed. Select the stream quality from the drop down box, the camera supports five types. (Highest, High, Medium, Low and Lowest) > Bit rate: If the [Quality] option set to CBR, this option is displayed.
  • Page 13 Audio Motion detect Audio In > Enable: Click the check box if you want to send the audio from the microphone input connector. Note: The Clients connected to the IP device remain unaffected Preview with additional changes made in the setting. You can preview the motion detection window on the preview >...
  • Page 14: Network Settings

    Network settings How to set the motion detect window 1. Click the [Add] button. The motion detect window is displayed. You can add the five windows maximum for Basic motion detection area. 2. Set the [Sensitivity] option. 3. Click the edge or corner of the window box to adjust the window size for motion detection.
  • Page 15 ARP Ping > RTP multicast: When enabled it reduces the transmission load on the camera by making the computer of the same > Enable ARP Ping to configure IP address: Check to enable segment network receive the same transmission data. When ARP ping.
  • Page 16 TCP/IP Gateway: Enter the gateway address. DNS server status > Primary DNS server: Enter the Primary domain name server that translates the hostnames into IP address. > Secondary DNS server: Enter the Secondary DNS server address that backups the Primary DNS. •...
  • Page 17 DDNS IP filtering This free service is very useful when combined with the LG DDNS The access of the IP addresses in the list are allowed or denied Server. It allows the user to connect the IP device using the URL, according to the choice made in the drop-down list of the Basic rather than an IP Address.
  • Page 18 Deny all: Deny all the IP address basically, but the IP • Remove: Click this button to delete the IPv6 address. addresses in the list are allowed. It needs at least one IP 1. Select the alias from the list. address to activate this function.
  • Page 19: User Settings

    User settings 4. Select the authority from the drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Basic Administrator: Allows you to operate setup menus The IP device is shipped with the login rights of administrator only. and to view live images.
  • Page 20 The connections depend on the stream configuration as are affected by this setting. shown in the following Maximum RTP stream connection by • Save: Click this button to confirm the settings. stream configuration. LW332/LW335/LW6354/LW6324 Series Maximum Frame Video Codec Resolution Quality Rate stream H.264...
  • Page 21: Sd Card Settings (Option)

    SD Card settings (Option) > Overwrite: If the micro SD card has insufficient space and this option will be activated. It will overwrite the oldest data. > DiskFull Notification: Sends an warning e-mail to the SMTP Basic server when the micro SD card has fully recorded. Select the SMTP server from the drop-down list.
  • Page 22 SD card has insufficient space. 2. Remove the micro SD card from the micro SD card slot of the camera. • The downloaded file can be played by using the LG File player. Note: > Remove: Delete file from the SD card.
  • Page 23: Event Settings

    Event settings • Stream: Selects the stream of the connected camera. • Programmable Alarm: When the sensor event is activated, the camera will start the recording Event schedule with the setting value of these options. Using this When an event (VA/ Motion detect/ Sensor Event) occurs, this unit function, you can get high quality recorded image.
  • Page 24 Event Server Password: Type the password for the folder shared in the FTP Server. Event Servers are used to receive the recorded video clip and/or notification messages. Folder: Type the path with the folder that is shared in the FTP server. Test: Select [Test] to test the FTP server.
  • Page 25 Sensor & Relay Enable SSL: Check when use the SSL (Secure Socket Layer) protocol. SSL protocol is cryptographic protocols that provide secure communication on a network. Receiving address: Type the recipients e-mail address. You can specify only one recipient e-mail address. Administrator address: Type the e-mail address of the administrator.
  • Page 26: Osd Menu Setup

    OSD Menu Setup DAY/NIGHT AUTO LEVEL LOW/ MIDDLE/ HIGH The following table shows the list of menu items and options. DWELL TIME The option depends on the model. These options are depending on models. EXIT RET/TOP/END The OSD images are different from each model. Main Sub Menu Contents...
  • Page 27 RECTANGLE MASK AREA1 to RET/TOP/ EXIT NUMBER AREA8 RECT. EXIT RET/TOP/END ON/OFF DISPLAY BACK FOCUS MANUAL ADJUST HEIGHT 4 to 100 ABF PUSH WIDTH 4 to 100 FOCUS MOVE Y 2 to 98 RESET MOVE X 2 to 98 D/N ABF OFF/ON RET/TOP/ EXIT...
  • Page 28: General Operation

    General Operation LANGUAGE The option depends on the model. 1. Click the [OSD control] button on the LG Smart Web Viewer. EXIT RET/TOP/END 2. Click button on the OSD control window. SCENE The camera setting menu appears on the live view window.
  • Page 29: Exposure Settings

    Notes: WDR/BLC • button: Used to move upper direction on the menu screen. Use WDR/BLC option to view the object clearly in backlight conditions. • button: Used to move lower direction on the menu screen. 1. Select [WDR/BLC] option on the [EXPOSURE] menu. •...
  • Page 30 BRIGHTNESS SENS-UP You can increase the brightness of the darkened video. If you set the If pictures are not clear due to darkness, this SENS-UP operation brightness to lower value, the image gets darkened. If you set the would increase the sensitivity of picture. brightness to higher value, the image gets bright.
  • Page 31: White Balance Settings

    White Balance settings OUTDOOR: The color temperature range for the proper white balance is approximately 5 100 K. Select the method by which the camera shifts its output colors to > RED: Set the desired red value. compensate for the color of a light source. >...
  • Page 32: 3D-Dnr Setting

    3D-DNR setting Privacy setting This function is aiming at the protection of personal privacy. The selected part is not displayed on the screen. 1. Select [3D-DNR] option. If pictures are not clear due to noise, this option would reduce the noise of picture. 1.
  • Page 33: Back Focus Setting

    Back Focus Setting MOVE Y: Moves vertical position of the mask. MOVE X: Moves horizontal position of the mask. The back focus function is activated automatically according to your • CIRCLE : setting. And also, when the Day&Night function is activated, the Back Focus function is activated automatically.
  • Page 34: Special Menu Settings

    FOCUS RESET Special menu settings Reset the focus point to factory default position. Select the [FOCUS RESET] option on the [BACK FOCUS] menu and then click button. The screen will be dim. Use the [Manual Adjust] or [ABF push] option to adjust the focus. Note: You can reset the focus using the ABF button.
  • Page 35 D-EFFECT (Digital effect) PIP (Option) You can select the digital effect. You can view an image in PIP(picture in picture) mode. 1. Select the [D-EFFECT] option on the [SPECIAL] menu. 1. Select the [PIP] option on the [SPECIAL] menu. 2. Use button to select a digital effect.
  • Page 36: Scene Mode Setting (Option)

    USER TITLE SCENE mode setting (Option) You can use the camera identification to assign a number and You can set value installed camera environment properly using this character to the camera. function. Several configuration value is set automatically to select To disappear the user title, select [OFF].
  • Page 37: Reset Setting

    Notes: • Set each value of option as selected option on the [SCENE SHARPNESS MODE] like as below table. BRIGHTNESS SENS-UP OPTION BKLT LOWLIT OUTDOOR EXPOSURE Shutter AUTO AUTO AUTO AUTO speed • Value of [SCENE MODE] is not initialized even the reboot system. MIDDLE MIDDLE HIGH...
  • Page 38: Reference

    • IP Conflicts: If the LG network device is set with a static IP address and if the DHCP option is set then there may be IP’s same as the network device and other network partner. Hence set the static IP address to 0.0.0.0 to resolve this conflict.
  • Page 39 After the factory settings login using the default user name and password. Video Streaming problems • If the video streaming does not start on the Web browser, install the LG Web Client ActiveX program on your computer following the instructions on the Web browser. •...
  • Page 40 • If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the number of applications running on the client computer. • If the client PC’s are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting.
  • Page 41: Open Source Software Notice

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
  • Page 42: Specifications

    Specifications LW332/LW335/LW6324/LW6354 Series Item LW332 LW335 LW6324 LW6354 Image Device 6 mm (1/3 type) Progressive Scan CMOS (1.3 Mega Pixels) DC-Iris, CS Mountable (Optimization of 6 mm Lens Type F1.2 Varifocal Lens (2.8 mm to 10 mm) (1/3 type) Lens of 1.3 Mega Pixels or above) Day/Night Color 0.3 lx (F1.2, Gain : High)
  • Page 43 IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP Protocol IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Operation Temp/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %) Power Consumption 6.5 W...
  • Page 44 LW342/LW345/LW6424/LW6454 Series Item LW342 LW345 LW6424 LW6454 Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (2 Mega Pixels) Lens Type DC-Iris, CS Mountable (Optimization of F1.4 Varifocal Lens (3 mm to 9 mm) 6.49 mm (1/2.8 type) Lens of 2 Mega Pixels or above) Day/Night Minimum...
  • Page 45 Ethernet 10/100 Ethernet TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 and IPv6 Protocol FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) IPv4 Operation Temperature/Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Power Source PoE (IEEE 802.3af ), DC 12 V (±20 %)
  • Page 46 LW352/LW355 Series ITEM LW352 LW355 Camera Image Device 6.49 mm (1/2.8 type) Progressive Scan CMOS (3.0 Mega Pixels) Lens DC-Iris, CS Mountable (Optimization of 6.49 mm (1/2.8 type) Lens of 3 Mega Pixels or above) Color 0.4 lx (F1.2, Gain : High) Illumination 0.005 lx (F1.2, Gain : High) Resolution...
  • Page 47 Password Protection, HTTPS(SSL, TLS) Protocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP IPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG) Management Integrated Client LG Ipsolute VMS Simple Web Client Live monitoring and system management for a device...