Ejecting A Single Cartridge - HP STORAGEWORKS SSL1016 Reference Manual

Autoloader Operation

Ejecting a Single Cartridge

You can remove a single cartridge from the autoloader by specifying the desired
cartridge by barcode or location, or by choosing the cartridge currently in the tape
drive.
To eject a cartridge by barcode:
1. On the main menu, scroll to Commands.
2. Press Enter.
3. On the Commands submenu, scroll to Eject.
4. Press Enter.
5. On the Eject submenu, scroll to Cartridge.
6. Press Enter.
7. Scroll to By Barcode.
8. Scroll to the label that corresponds to the cartridge you want to unload.
9. Press Enter.
An hourglass appears on the LCD as the cartridge you want is ejected from the
mailslot.Wait until the hourglass disappears from the LCD before pulling out the
cartridge.
To eject a cartridge by location:
1. On the main menu, scroll to Commands.
2. Press Enter.
3. On the Commands submenu, scroll to Eject.
4. Press Enter.
5. On the Eject submenu, scroll to Cartridge.
6. Press Enter.
7. Scroll to By Location.
8. Scroll to the slot containing the cartridge you want to eject.
9. Press Enter.
80
A barcode label appears.
A map of all the magazine slots appears. Occupied slots are indicated by an
asterisk.
SSL1016 Tape Autoloader Reference Guide