Table of Contents
Advertisement
Operating the DLT80 Drive
Loading a Cartridge
1. When the Operate Handle LED is illuminated, lift the cartridge insert/release
2. Insert the cartridge 2.
3. Push the cartridge completely into the drive.
4. Lower the handle 3 to lock the cartridge in place.
Figure 16: Loading a cartridge sequence
Once a cartridge is inserted, the cartridge initialization process begins and the
Tape in Use LED flashes. When the cartridge is at the beginning of tape (BOT)
marker, the Tape in Use LED illuminates. The cartridge is now ready for use.
DLT80 Tape Drive Reference Guide
Caution:
When loading or unloading a cartridge, the Operate Handle LED
must be illuminated.
handle 1.
3
1
Operating the DLT80 Tape Drive
2
43
Advertisement
Table of Contents
