Default Password - HP STORAGEWORKS SSL1016 Reference Manual

Autoloader Operation

Default Password

The default user ID is guest. The default password is guest. See "Set Security
Option" in this chapter for information on changing the user ID and password.
Status information appears on the right side of the home page and every page of
Web Administration. The menu headings also appear at the top of every page. To
access the functionality under the menu heading, click the menu heading. Web
Administration prompts you for your username and ID, then displays the opening
page for that menu.
The Configuration page includes a submenu on the left side of the page. When
Web Administration displays the first Configuration page, it is open to the
Systems Operations submenu. You can click Networking to access Ethernet
settings options, and Security to access security settings options.
Figure 77: Configuration Page
Usually, after you have set the options, you click a Submit button to implement
the new settings. Next to all Submit buttons is a Reset button. The Reset button
does not reset the autoloader to its default settings, it just clears the settings in the
option so that you can change them.
100 SSL1016 Tape Autoloader Reference Guide