HP STORAGEWORKS SSL1016 Reference Manual page 90

Autoloader Operation
Figure 64: Autoloader status message
Table 8: Autoloader Status Messages
Magazine
L=
R=
L= (no
R= (no
Loader
ONLINE
OFFLINE
Drive
ONLINE
OFFLINE
Mode
Random
Mixed
Sequential
Seq Cycle Mode
NOTE: ISVs support different modes of operation. Be sure your autoloader is set to the
correct mode of operation. The autoloader defaults to Random mode. See "Control
Mode" in Chapter 2 for additional information.
Barcode Reader
No
90
A list of messages similar to the following screen appears.
Magazines: L R
Loader: ONLINE
Drive: ONLINE
Mode: Mixed
Barcode Reader:
The left magazine is present.
The right magazine is present.
) The left magazine is not present.
) The right magazine is not present.
The autoloader SCSI connection is active.
The autoloader SCSI connection is not active.
The drive SCSI connection is active.
The drive SCSI connection is not active.
Default. The autoloader is operating in Random mode.
The autoloader is operating in Mixed mode.
The autoloader is operating in Sequential mode.
The autoloader is operating in Seq Cycle Mode.
A barcode reader is present.
A barcode reader is not present.
SSL1016 Tape Autoloader Reference Guide