Grounding Methods - HP STORAGEWORKS SSL1016 Reference Manual

Electrostatic Discharge

Grounding Methods

There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
If you do not have any of the suggested equipment for proper grounding, have an
authorized reseller install the part.
Note:
installation, contact your authorized reseller.
146
Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1
megohm ± 10 percent resistance in the ground cords. To provide proper
grounding, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor
mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
For more information on static electricity, or for assistance with product
SSL1016 Tape Autoloader Reference Guide