Installation and Configuration
5. On the Security submenu, scroll to Set Password.
Figure 43: Select Set Password
6. Press Enter.
7. To set a password at the operator level, scroll to Operator. To set a password at
Figure 44: Select password level
8. Press Enter.
Figure 45: Set Password screen
9. Press Enter again.
10. In the text box, scroll to the first number of the password.
11. Press Enter.
12. Repeat steps 10 and 11 to enter the remaining numbers of the password.
58
Security
Set Password
the administrator level, scroll to Administrator.
Operator
Administrator
The Set Password screen appears.
Login as OP
Enter New Password
A text box appears above the first asterisk.
The text box above the asterisk disappears and another text box appears above
the next asterisk.
SSL1016 Tape Autoloader Reference Guide