Rack Stability - HP STORAGEWORKS SSL1016 Reference Manual
Tape autoloader
Hide thumbs
Also See for STORAGEWORKS SSL1016:
- Quickspecs (12 pages) ,
- Technical specifications (4 pages) ,
- Installation instructions (2 pages)
Table of Contents
Advertisement
About this Guide
Rack Stability
Rack stability protects personal and equipment.
12
Power supplies or systems marked with these symbols indicate the
presence of multiple sources of power.
WARNING:
remove all power cords to completely disconnect power from the
power supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING:
To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.
WARNING:
To reduce the risk of personal injury or damage to the
equipment, be sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
In single rack installations, the stabilizing feet are attached to the rack.
In multiple rack installations, the racks are coupled.
Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.
To reduce the risk of injury from electrical shock,
SSL1016 Tape Autoloader Reference Guide
Advertisement
Table of Contents
