Adjusting The Crisper Humidity Control; Adjusting The Freezer Shelf - Whirlpool Top-Mount Refrigerator Use & Care Manual

A
DJUSTING THE CRISPER HUMIDITY
CONTROL
(on some models)
You can control the amount of humidity in the moisture-
sealed crispers. Adjust the control to any setting between
LOW and HIGH.
•
LOW (open) lets moist air out of the crisper for best
storage of fruits and vegetables with skins.
•
HIGH (closed) keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
A
DJUSTING THE FREEZER SHELF
(on some models)
Adjust the freezer shelf to match the way you use your
freezer.
To remove the shelf: (Style 1)
1.
Lift entire shelf slightly.
2.
Move shelf all the way to one side.
3.
Tilt other side up and out of shelf support cups.
4.
Pull shelf up and out.
2
To replace the shelf:
1.
Tilt the shelf and insert into freezer compartment.
2.
Insert one end of the shelf all the way into the center
of the shelf support cups.
3.
Lower other end of shelf and insert into the shelf
support cups.
4.
Lower shelf into place.
1 & 2
NOTE: The shelf should lower slightly and lock into
place. If the shelf does not appear sturdy, make sure both
ends of the shelf are inserted into the shelf support cups.
3 & 4
1
3
4
HIGH
To remove the shelf: (Style 2)
1. Remove items from the shelf.
2. Lift back of shelf over stop.
3. Slide shelf straight out.
To replace the shelf:
1. Slide back of shelf into shelf tracks on walls of
cabinet.
2. Slide shelf in all the way.
LOW
17