Table of Contents
Advertisement
1
I
Removing
the crispers
and crisper
cover
To remove
the crispers:
I
//I/ Pull out to
1.
2.
3.
Slide crisper straight out to the stop.
Lift the front and slide out the rest of
the way.
Replace in reverse order.
To remove
the cover:
1. Push up the glass insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace
the cover:
1. Fit back of cover frame into notch sup-
ports on back wall of refrigerator, then
lower the front into place.
2. Make sure the front cover metal support
is in the notches in the sides of the liner.
NOTE: lf the support is not positioned
properly, the doors may not close all
the way.
3. Slide back of glass insert into place, then
lower front.
the stop, lift
the front, and
pull again.
Remove the glass
insert. Lift the
cover front, then
the back.
NOTE: Glass
insert is heavy.
Handle it
carefully.
Adjusting
the crisper
humidity
control
You can control the amount of humidity in
the moisture-sealed
crispers. Adjust the
control to any setting between LOW
and HIGH.
l
LOW (open) lets moist air out of the
crisper for best storage of fruits and
vegetables with skins.
l
HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
Humidity
Control
HIGH. . . . . LOW
--
17
Advertisement
Table of Contents
