Appendix B Fault Codes - Hoveround MPV4 Owner's Manual

Hoveround.arc 11/2/06
Appendix B: Fault Codes
The microprocessor checks various features within the controller and will display
any fault indication. The controller may prevent the chair from driving should a critical
fault condition exist. Refer to the appropriate fault code section for the system
used on your MPV 4.
MPV 4s using these style control systems use lighted bars to display fault
codes.
D82008204 REV B 1/14/04
10:07 AM Page 39
Note: When there is a fault please follow this procedure:
A. Switch off the control system.
B. Make sure that all connectors on the chair and the
control system are connected securely. Make sure
brake release levers are in the drive position.
C. Switch on the control system again and try to drive
the chair. If the fault occurs again, switch off and do
not try to use the chair. Contact Hoveround Support
1-800-96-HOVER (1-800-964-6837)
Fault Code Lights
Speed Bars
VSI
Fault Code Lights
PILOT
Chapter 9 39