Controller Position Adjustment; Swivel Seat Adjustment - Hoveround MPV4 Owner's Manual

Hoveround.arc 11/2/06
B. Controller Position Adjustment
You can adjust the position of the controller by lifting the arm and loosening the
socket head cap screw closest to the controller. Use the 1/4" hex, T-handle wrench
provided with your chair (See Figure 4B below).
Slide the controller bracket to a comfortable position and secure the screw. Make
sure the screw is clear of the removal key opening, (Fig. 7B, Pg. 31) in the bracket
before tightening.
C. Swivel Seat
The swivel seat permits the seat to pivot from the forward facing position through
90 degrees in either the left or right directions. The seat will lock in each of the
forward, left and right facing positions. This feature is provided to make side
transferring easier. The swivel release lever is mounted on the left side in the standard
position, and can be changed to the right side by a Hoveround Service Technician.
D82008204 REV B 1/14/04
10:07 AM Page 23
T-Wrench
Warning! The seat must be locked into the forward
position before attempting to drive the vehicle.
3" Max
Figure 4B
Chapter 4 23