Chapter 1 Operating Instructions - Hoveround MPV4 Owner's Manual

Hoveround.arc 11/2/06
1. On/Off - Press to turn the system on and off.
2. System Status Indicator – Steady illumination means all systems are
functioning properly. A flashing display indicates an error is present or the
controller is locked. Refer to appendix B (page 39) for error codes and
troubleshooting information.
3. Battery Gauge – Shows how much battery charge is remaining. All lights lit
means full charge. Recharge as often as possible.
4. Joystick – Controls speed and direction. The further you push, the faster you
go. To prevent an error code, do not push the joystick at the same time you
turn the power on.
5. Speed/Response Indicator (if so equipped) – Indicates the currently selected
speed by the number displayed or the number of lighted segments. (If the
number 5 is displayed or when all lights are lit, or knob is fully clockwise you
are at top speed.)
6. Speed Up – Depending on the model, pressing the button or rotating the
knob clockwise increases speed.
7. Speed Down – Depending on the model, pressing the button or rotating the
knob counterclockwise decreases speed.
8. Mode (if so equipped) – Press to select the desired mode of operation drive,
speed or power options. In speed mode, move the joystick right to increase
setting, left to decrease. Press mode or move the joystick forward to lock in
the setting.
9. Horn Button (if so equipped) – Press to activate the horn.
Additional Features
Locking feature (optional on some controls) – Locks the controller. Refer to
appendix C (page 42) for operating instructions.
Sleep mode – Your chair will either power down or go off if left idle for 5
minutes. The system indicator may blink or the controller will completely
power off. Push the on/off button twice to restart.
D82008204 REV B 1/14/04
10:07 AM Page 15
Chapter 1 15