Connecting Line Input Audio Equipment - Sony MSW-900 Operation Manual

5-5-4 Connecting Line Input Audio Equipment

Connect the audio output connector of the audio equipment that supplies
the line input signal to the AUDIO IN CH-1 or CH-2 connector.
AUDIO IN CH-1/CH-2 switches: At the factory
setting, when the audio cable is connected
to either the AUDIO IN CH-1 or CH-2 connector,
the signal input to the AUDIO IN CH-1 or CH-2
connector is automatically selected as the
signal to be recorded. This is true regardless of
the AUDIO IN CH-1/CH-2 switch settings. (This
is called XLR connection automatic detection
function.)
When the XLR connection automatic detection
function is set to OFF on the VTR MODE 1 page
of the MAINTENANCE menu, set the AUDIO IN
CH-1 or CH-2 switch corresponding to the
channel to which the audio equipment is
connected to REAR.
Line input connection
Chapter 5 Setting Up the Camcorder
Set the LINE/MIC/
+48 V ON switch for the
channel to which the
audio signal source is
connected to LINE.
Audio equipment
AUDIO IN for CH-1
or CH-2
5
5-29