3-1 About Cassettes
This section describes the procedure for loading and unloading a
cassette.
See "Specifications VTR Section "(page A-4) for information about the cassettes
you can use in the camcorder.
3-1-1 Loading and Unloading a Cassette
Loading a cassette
1
Turn on the POWER switch.
POWER switch
HUMID display
Note
If the interior of the VTR section is damp, the HUMID indicator will
light. If this happens, wait until the indicator goes off before going
on to step 2.
Chapter 3 Recording and Playback
3
(Continued)
3-1