6
To end menu operations, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen (when the viewfinder
DISPLAY switch is set to ON or the VF DISP item is set to ON on
the VF DISP 1 page).
4-7-3 Display Mode and Setting Change and
4
Adjustment Progress Messages
You can limit or suppress the messages that give details of setting
changes and adjustment progress and results by setting a display mode.
The conditions under which messages are displayed and their
correspondence with the display mode are as follows:
Setting change and adjustment progress messages and display modes
Y: Message is displayed.
N: Message is not displayed.
Message
display condition
When the filter selection
has been changed
When the gain setting has
been changed
When the setting of the
WHITE BAL switch has
been changed
When the OUTPUT/DCC
selector has been set to
DCC ON or OFF
4-72
Chapter 4 Adjustments and Settings for Recording
Message
ND : n, CC : m (where n = 1, 2,
3, 4, m = A, B, C, D)
GAIN : n (where n = –3dB, 0dB,
3dB, 6dB, 9dB,12dB, 18dB,
24dB, 30dB, 36dB, 42dB, 48dB)
WHITE : n (where n = A CH, B
CH, PRESET) or ATW : RUN
DCC : ON (or OFF)
Display mode
setting
1
2
3
N N Y
N N Y
N N Y
N Y Y
(Continued)