Removing the setup signal from the external video
signals (MSW-900 only)
When the UC/J SELECT item is set to UC on the FORMAT page of the
OPERATION menu, the SETUP REMOVE item appears on the EXT
VIDEO IN page of the USER menu.
3
The SETUP REMOVE item allows you to eliminate the setup signal
from the external video signals within a range of from 0 to 10 % in 0.5 %
steps. The elimination range has been set to 7.5 % at the factory.
Note
When the UC/J SELECT item is set to UC on the FORMAT page of the
OPERATION menu, a 7.5 % setup signal is automatically added to the
composite video signal output from the TEST OUT connector.
3-63
Chapter 3 Recording and Playback