Sony MSW-900 Operation Manual page 318

— TURBO GAIN button (ASSIGN 1 switch to which the TURBO
GAIN function is assigned)
• When you connect the remote control unit, the settings of the paint
adjustment that were in effect the last time the remote control unit was
used are recalled.
When removing the remote control unit from the camcorder
The setting of the camcorder returns to the setting in effect before the
remote control unit was connected.
By setting the menu setting, the setting of the paint adjustment made
5
with the remote control unit can be retained even after the remote control
unit is removed from the camcorder.
For details, see "Structure of the paint adjustment data" on the next page.
When connecting the monitor to the MONITOR OUT
connector of the remote control unit
The MONITOR connector of the RM-B150 (BNC type) outputs the
same signal as that from the TEST OUT connector on the camcorder.
Use the black cable supplied with the RM-B150 to connect the monitor
to the MONITOR connector on the RM-B150.
5-38
Chapter 5 Setting Up the Camcorder