Message
display condition
When the shutter speed
and mode setting has been
a)
changed
When the black or white
balance has been adjusted
a) This is also displayed for about 3 seconds when the SHUTTER selector is set to
ON.
Changing the display mode
The currently set display mode appears on the VF DISP 1 page of the
USER menu. Follow the procedure below to change it.
1
Follow steps 1 to 2 in "4-7-2 Selecting the Display Items" on page
4-69, until the VF DISP 1 page of the USER menu is on the
viewfinder screen.
2
Turn the MENU knob to move the t mark to VF DISPLAY
MODE, and push the MENU knob.
The t mark to the left of VF DISPLAY MODE changes to the z
mark and the z mark to the left of the setting changes to the ? mark.
Message
: SS : 1/100 (MSW-900) or 1/60
(MSW-900P) (or 1/125, 1/250,
1/500, 1/1000, 1/2000,
ECS, EVS)
E.g. WHITE : OK
For more information, see
Section "4-1 Adjusting the Black
Balance and the White Balance"
(page 4-1).
Chapter 4 Adjustments and Settings for Recording
Display mode
setting
1
2
3
N Y Y
N Y Y
4
(Continued)
4-73