Recording Video Signals From External Equipment (When Using The Msdw-904) - Sony MSW-900 Operation Manual

3-5 Recording Video Signals
from External Equipment
(When Using the
MSDW-904)
Inserting the optional MSDW-904 extension board (not supplied) in the
camcorder enables the camcorder to record analog composite video
signals from external equipment connected to the GENLOCK IN
connector.
Selecting the signals to be recorded
You can select which signals you will record, pictures being shot by the
camcorder or video signals from the external equipment connected to
the GENLOCK IN connector, using the EXT VIDEO IN page of the
OPERATION menu.
When the REC VIDEO SOURCE function is assigned to the ASSIGN 2
switch, you can switch the signal to be recorded, regardless of the
setting on the EXT VIDEO IN page of the OPERATION menu.
Note
You can switch the signals to be recorded at any time while recording
on the tape. However, the signals recorded at the point where the signal
is switched may be distorted.
Chapter 3 Recording and Playback
3
3-55