Configuring Redundant Recording - HIKVISION Network Video Recorder User Manual

User Manual of Network Video Recorder

5.8 Configuring Redundant Recording

Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the
redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the HDD and click
1) Set the HDD property to Redundancy.
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to Chapter 11.4.1 Setting HDD Property. There should be
at least another HDD which is in Read/Write status.
3. Enter the More Settings interface of Record Parameters setting.
Menu> Record> Parameters
1) Select Record tab.
2) Select Camera you want to configure in the drop-down list.
3) Click the More Settings button and check the checkbox of Redundant Record.
Figure 5. 25 HDD General
to enter the Local HDD Settings interface.
Figure 5. 26 HDD General-Editing
68