Smart Playback - HIKVISION Network Video Recorder User Manual

User Manual of Network Video Recorder
Table 6. 4 Detailed Explanation of Playback-by-tag Toolbar
Button Operation
Audio on/
/
Mute
Add default
tag
Pause reverse
play/
Reverse play/
/
Single-frame
reverse play
Previous day
Stop
Video type
Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate
specific frames.

6.1.5 Smart Playback

Purpose:
The smart playback function provides an easy way to get through the less effective information. When you select
the smart playback mode, the system will analyze the video containing the motion or VCA information, mark it
with green color and play it in the normal speed while the video without motion will be played in the 16-time
speed. The smart playback rules and areas are configurable.
Before you start:
To get the smart search result, the corresponding event type must be enabled and configured on the IP camera.
Here we take the intrusion detection as an example.
1. Log in the IP camera by the web browser, and enable the intrusion detection by checking the checkbox of it.
You may enter the motion detection configuration interface by Configuration> Advanced Configuration>
Events> Intrusion Detection.
Figure 6. 17 Setting Intrusion Detection on IP Camera
2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage
methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps:
1. Enter Playback interface.
Menu>Playback
Button Operation
Start/Stop
/
clipping
Add
customized tag
Pause play/
Play/
/
Single-frame
play
Next day
Digital Zoom
Button Operation
30s forward
Tag
management
Scaling
up/down the
/
time line
Full Screen
Save the clips
85
Button Operation
30s reverse
Slow forward
Fast forward
Exit
Process bar