Adjusting Live View Settings - HIKVISION Network Video Recorder User Manual

User Manual of Network Video Recorder

3.3 Adjusting Live View Settings

Purpose:
Live View settings can be customized according to different needs. You can configure the output interface, dwell
time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for. Outputs include HDMI1-6,
VGA, LCD (depends on the model).
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in
Live View.
•
Enable Audio Output: Enables/disables audio output for the selected video output.
•
Event Output: Designates the output to show event video.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Setting Cameras Order
Figure 3. 6 Live View-General
Figure 3. 7 Live View- Camera Order
40