Managing User Accounts; Adding A User - HIKVISION Network Video Recorder User Manual

User Manual of Network Video Recorder

14.5 Managing User Accounts

Purpose:
There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.

14.5.1 Adding a User

Steps:
1. Enter the User Management interface.
Menu >Configuration>User
2. Click the Add button to enter the Add User interface.
3. Enter the information for new user, including User Name, Password, Level and User's MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
Figure 14. 5 User Management Interface
Figure 14. 6 Add User Menu
200