Post-Dial With Headset Button; Dial Using Pre-Programmed Keys Or Buttons; Dial A Number From The Call List; Dial Last Called Number With Headset Button - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
NOTE: The + character cannot be entered and international numbers cannot de dialled in the
following circumstances:
• If the 0 key has been configured as a hot key.
• If the handset has been set up to perform advanced functions normally used by a system
administrator, as described in
5.2.2

Post-Dial with Headset Button

To make a call when a headset is used, press the button
the number.
5.2.3

Dial Using Pre-Programmed Keys or Buttons

A Navigation key, Hot key, Soft key, or a headset button
number. Press the pre-programmed key or button to dial the number. The call is
automatically connected.
5.2.4

Dial a Number from the Call list

Tip: A number can be dialed from the Call list by pressing
list and pressing "Call" or
1 Open the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call list".
4 Select a number.
5 Press
dialed. Press "More" and select "Edit number". The 25 last received, dialed or missed
calls are stored in a call list. See
5.2.5

Dial Last Called Number with Headset Button

If a headset is used, the headset button can be pressed to dial the last called number. This
requires that the headset button is configured via the PDM/Device Manager.
5.2.6

Dial the Sender of a Message

It is possible to call the sender of a message stored in the message list.
1 Open the menu by pressing the "Menu" soft key.
2 Select
3 Select "Inbox".
4 Select message in the message list.
5 Press "View".
6 Press "More".
7 Select "Call sender".
5.2.7

Dial a Number from the Local Phonebook

1 Open the menu by pressing the "Menu" soft key.
2.The headset button must be configured in the handset via PDM/Device Manager.
31 October 2013 / Ver. C
9.1 Admin Menu
.
.
or the soft key "Call" to dial. The number can be edited before the call is
7.1 Calls
.
on page 63.
2
to get the ring tone and then dial
2
can be programmed with a
, selecting a number from the
on page 33.
TD 92789EN
24