Messaging - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
4 Enter name of the profile.
5 Press "Save".
6 Press "More" and then select "Import from".
7 Select the profile which settings to be used for the new profile.
8 If needed, press "More" and then select corresponding option to add/import
additional settings or remove settings.
Activate Profile
1 Enter the menu by pressing "Menu".
2 Select
3 Select profile from list.
When a profile is activated, the icon
mode.
Delete Profile
1 Enter the menu by pressing "Menu".
2 Select
3 Select profile from list.
4 Press "More".
5 Select "Delete" from menu.
6 Press "Select".
7 Press "Yes" to confirm.
Edit Profile
1 Enter the menu by pressing "Menu".
2 Select
3 Select the profile to edited.
4 Press "More" and then select "Edit".
5 Following options can be performed:
• Edit the wanted setting by marking it and then press "Edit".
• Add additional settings by pressing "More" and then select "Add setting" or
"Import from".
• Remove a setting by marking it and then select More > Remove setting.
6 If needed, mark the added settings and press "Edit" to make the changes.
7.4

Messaging

When a text message is received, the LED starts flashing green once and the message alert
signal sounds. The icon
displayed. The icon
message is received during a call, a beep notifies the user.
It is possible to reply, forward the message, call the sender, and call number
text.
7.The number must consists of minimum 3 digits.
31 October 2013 / Ver. C
in the menu.
and the name of the profile are displayed in idle
in the menu.
in the menu.
nd the content of the received message are automatically
remains in the display until all new messages are opened. If the
TD 92789EN
7
included in a
42