7
Operating Your Video Matrix Switcher
This section describes:
• The startup display (see
• Using the selector buttons (see
• Confirming actions (see
• Switching options (see
• Locking the front panel (see
7.1 Startup Display
After switching on the power, the LCD display
screens in sequence.
The front panel of the VS-6464DN includes a numeric keypad within the
selector buttons area
numbers as well as various numeric configuration values (see
When the unit is powered-on, the last matrix setup that was used is loaded.
Use either the recall setup
Section
7.4.5
7.1.1 Viewing the Display
Figure 8
shows the output-input matrix on the LCD display. The LCD
display can show 13 out of the 64 available matrix combinations at once. To
1 The text in the LCD Display may vary (according to machine settings)
2 See
Table 1
3 Records a stored configuration from a preset
4 For quick retrieval you can program a default setup that is commonly used
Operating Your Video Matrix Switcher
Section
Figure 8: Default Startup Status Display Sequence
2
. This keypad lets you enter both the output and input
3
(see
) functions to retrieve other setups.
Section
7.1)
Section
7.2)
Section
7.3)
7.4)
Section
7.5)
1
Section
8.1.6
) or default setup recall
shows the following
Section
7.2
).
4
(see
17