Table of Contents
Advertisement
6.2.2 Connecting to the Ethernet Port via a Network Switch/Hub
To connect to the Ethernet port on the VS-3232DVI via a network switch/hub:
• Connect the PC to the Ethernet network switch/hub using a straight through
cable
7
Operating Your Video Matrix Switcher
This section describes:
• The startup display (see
• Using the selector buttons (see
• Confirming actions (see
• Switching options (see
• Locking and the front panel (see
7.1 Startup Display
After switching on the power, the LCD display
sequence.
The VS-3232DVI does not have separate output and input buttons. Instead, the
front panel includes a numeric keypad within the Selector Buttons area
numeric keypad lets you enter both the output and input numbers as well as various
numeric configuration values (see
When the unit is powered-on, the last matrix setup that was used is loaded. Use
either the recall setup
Section
7.4.5
1 The text in the LCD Display may vary (according to machine settings)
2 See
Table 1
3 Records a stored configuration from a preset
4 For quick retrieval, you can program a default setup that is commonly used
14
Operating Your Video Matrix Switcher
Section 7.1
Section 7.3
Section 7.4
Figure 8: Default Startup Status Display Sequence
3
(see
Section
) functions to retrieve other setups.
)
Section 7.2
)
)
)
Section 7.5
)
1
shows the following screens in
Section 7.2
).
8.1.6) or default setup recall
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
. This
4
(see
Advertisement
Table of Contents
