Dimmer Profiles; Back Light; Auto Test; Fixture Hours/Software Version - Chauvet Colordash Accent Quad User Manual

Hide thumbs Also See for Colordash Accent Quad:
Table of Contents

Advertisement

Dimmer Profiles

Back Light

Auto Test

Fixture Hours/
Software Version
Configuration
(DMX)
DMX
Personalities

DMX Control

COLORdash™ Accent Quad User Manual Rev. 2
This setting determines how fast the output of the COLORdash™ Accent Quad changes when
you modify the values of the red, green, blue, amber, and dimmer faders. This setting provides
four different options to simulate the dimming curve of an incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (OFF, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF:
The output is proportional (linear) to the dimmer and RGBA channel values.
Dimmer 1–3: The output follows the dimmer and RGBA channel values based on the
corresponding dimmer curve, DIM1 being the fastest and DIM4 the slowest.
This
setting
allows
COLORdash™ Accent Quad's display stays on after the last button is pressed on the control
panel.
1. Go to the Back Light main level.
2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
This setting cycles through the four colors one after the other to test the function of each color
output.
1. Go to the Information main level.
2. Select Auto
3. Select Test.
This option displays the total number of hours the fixture has run, and the installed software
version.
1. Go to the Information main level.
2. Select Fixture Hours or Version.
Use DMX configurations to operate the product with a DMX controller.
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (4 Ch, 6 Ch, or 10Ch).
·
See the
DMX Values
personality.
·
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
2. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality
10
6
4
for
selection
of
the
section for the highest starting address you can select for each
DMX
amount
of
time the
Personalities.
DMX Address
503
507
509
Operation
backlight on the
-11-

Advertisement

Table of Contents
loading

Table of Contents