Table of Contents
Advertisement
Attention
This setting can be used to expedite the dialing of Call-through calls, basically
getting it to the same level as with operator supported dialing (OSD) functions en-
abled. This feature will attach the destination number to the Call-through number.
It does not require a data connection. You should however be aware that it only
works in countries without fixed number lengths and if you have a trunk with your
carrier that allows passing the additional digits.
12.7.4 OTA-URL
The OTA-URL is the link to the Aastra administration portal, from where the AMC will
download the configuration (including license), Feature file and LCR file.
12.7.5 Default IM Host
If you would like to use the IM and Presence service of the AMC, the host URI of the
desired Default IM Host in your network has to be entered here. Contact your adminis-
trator for further information. As soon as the Default IM Host has been set correctly the
presence status line becomes available in the Home screen. Normally this will be your
corporate domain.
12.7.6 IM/Presence enabled
Set this to on to enable the use of instant messaging (IM) and presence. Check the IM
and Presence chapter
9
The Default IM Host setting will not be lost even if this option is disabled!
12.7.7 Anonymous Call Prefix
If your PBX supports outbound anonymous calls (no caller ID shown) enter the neces-
sary feature code here. The option Anonymous Call will become available whenever
you enter or select a phone number and open the call options menu.
This has to be configured as a PBX Access Code on the AMCC!
amc-3_blackberry_ug_en_2012-12
12 Administrator Settings
to learn more about this functionality.
51
Advertisement
Table of Contents
