Features Of The Amc; Placing Calls - Aastra AMC 3 User Manual

Blackberry

Hide thumbs Also See for AMC 3:

Table of Contents

8 Features of the AMC

The following explains all call related services of your AMC.

General Availability of Features

Available in- and out-call features depend on your PBX; for some features

please consult your PBX documentation. More or less features than the ones

described below might be available in your speciﬁc case. Features displayed

by the AMC can be conﬁgured through the feature ﬁle and can hence even

vary on a per-user basis. The Feature ﬁle is downloaded when you start your

AMC the ﬁrst time. It can also be downloaded manually. There can be several

feature ﬁles available but only one is assigned per user.

Contacts Sorting

Sorting in the AMC is always done by Family name. This is not conﬁgurable

as might be the case in the native Contacts. The reason is that access to this

capability can differ widely.

Wi-Fi with Blackberry Smartphones

A number of Blackberrys do not support Wi-Fi. Please note that in such

cases references to Packet Data only concern GPRS and the like, not Wi-

Fi. Please refer to the documentation of your Blackberry to ﬁnd out if Wi-Fi

is supported. If your phone is Wi-Fi capable, please refer to section

information about Wi-Fi Access Point conﬁguration.

Calls with the AMC can be made from within its screens and/or outside of them. This

depends on your Call Preference conﬁguration, refer to 12.5.To place a call using the

AMC, type in or select a number in the Contacts screen or Call List, and press the green

phone button. As soon as a call has been established, in-call features will become

available (in Wi-Fi and cellular networks with or without Packet Data). If a Wi-Fi or

Packet Data connection is available the AMCC will give feedback about the status of

the call(s). This feedback will be displayed as icons at the end of the status line of a

call.

amc-3_blackberry_ug_en_2012-12

8 Features of the AMC

7.1

for

Table of Contents