Table of Contents
Advertisement
4 Restrictions
(a) Setting on older Blackberry devices .
(b) Setting on newer Blackberry devices .
The Blackberry phones have keylock facilities that can password protect the phones.
These keylocks apply to all applications and hence also to the AMC. The only
exception to the keylock (if configured this way) is a cellular call which can be
accepted without removing this keylock. However, this does not apply to VoIP
calls in the same fashion. There you do need to enter the password, because this
accesses application features of your device.
Note:
To do anything except accepting a cellular call (such as features, etc.), you
will also need to enter the keylock.
Since the keylock mentioned above can't be overruled by any application, it is not
possible to display trueClip information.
The AMC cannot recognize the connection of a headset. However, most times a
connected headset will be used automatically. If this is not the case please use
the option Headset in the in-call menu of the AMC.
Bluetooth headsets could interfere with Wi-Fi systems, as both systems use 2.4
GHz frequency band contention can be an issue. Each Wi-Fi transmitter blocks
out 20 of the available 79 Bluetooth channels. This is specifically valid for lower
end Bluetooth headsets.
RIM security timer needs to be allowed to be rested by AMC. If not allowed, users
might have to type in password for answering and hanging up VoIP calls if device
locking is enabled.
To use fast call setup method via data channel for a cellular call, there must be
access to 3G or Wi-Fi for the call setup signaling.
To get automatic handovers between Wi-Fi and Cellular networks, "Enable han-
dover" has to be selected in the AMC's "Options" menu.
11
amc-3_blackberry_ug_en_2012-12
Advertisement
Table of Contents
