By Mobile Os Version; Details - Aastra AMC 3 User Manual

Blackberry

Hide thumbs Also See for AMC 3:

Table of Contents

4.3 By Mobile OS Version

Please note that some devices with the ﬁrmware version 4.5 slow down noticeably

during operation (while placing calls, for example, the navigation reacts unusually slow).

This is the case in the native dialer of these Smartphones and, as a consequence, also

in the AMC.

Firmware Updates

RIM releases regular ﬁrmware updates for Blackberry. It is recommended to

regularly update the ﬁrmware of your device. After updating with the Desktop

manager, the conﬁguration of your AMC will be lost and must be reloaded.The

application itself, however, will be preserved.

From version 7.1 on, handovers can only be done from VoIP to cellular networks.

When a HTTPS Callback comes in and if the ring-tone volume is not low, a high

frequency click sound can sometimes be heard. The generation of this cannot be

inﬂuenced by the AMC.

Which possibilities exist to present Caller-ID information received by cellular chan-

nel are limited by the mobile platform as such.

The establishment of mobile-data connection when the AMC has been logged off

or is activated from sleep mode, can be perceived as slow. Until the AMC is fully

registered the call setup time will be longer. With a non-Operator-Supported SIM,

the destination number will in this case be sent over DTMF.

Muting, or changing the call volume during cellular calls always has to be done

via the native dialer menu, which means that you have to leave the in-call screen

of the AMC. A call muted in Wi-Fi will be unmuted by the mobile OS at handover

to GSM/3G! On some (particularly older) devices there is no possibility to adapt

the call volume.

The default sound proﬁle "Normal" sets notiﬁcations of third-party applications to

"Silent". If the AMC doesn't replay ringtones, the sound proﬁle has to be edited

manually. In order to do that, look for the sub-proﬁle "Other" in the Proﬁle you

would like to use. There you will ﬁnd the setting "AMC call".

This option can also be used to assign a speciﬁc ring tone to the AMC.

Please note that in the case of a handover, the display will "wake up". When this

occurs, please slightly remove the phone from your ear and then back to trigger

the proximity sensor once more.

amc-3_blackberry_ug_en_2012-12

4 Restrictions

Table of Contents