Screening Your Calls - Uniden BLUETOOTH XDECT R035BT Owner's Manual

Another feature your answering system gives you is call screening.

Screening Your Calls

While the system is taking a message, you can hear the caller on the
base speaker (if you turn on Call Screen) or from a handset. Only one
handset at a time can screen calls. If another handset is screening the
call, the handset beeps and returns to standby.
To...
hear the caller
leaving a message
answer the call
mute the call screen
without answering
You can also use your answering system from any touch-tone phone.
Using the System While You're Away from Home
Before you can use this feature, you must program a security code.
1. With the phone in standby, open the menu from any handset.
Programming a security code
2. Select
3. Use the number keypad to enter a two-digit security code (00 to
Ans. Setup
99). Press
#
Remember to make a note of your new security code!
1. Call your telephone number and wait for the system to answer.
Dialing in to your system
If you have the
answers after 2 rings if you have new messages and 4 rings if
x
you don't. You can hang up during the third or fourth ring.
From the base
Just listen to the
caller over the
speaker.
Not available.
Press
PLaY/sToP
If you mute the call screen, the system continues
taking the message: it just stops playing through
the speaker.
, then select
MENu/sELECT
Ring Time
.
Security Code
when you're finished.
set to
Toll Saver
From a handset
Press
MEssagEs/MuTE
Press
TaLk/fLash
Press or return the
END
handset to the cradle.
.
, the system
.
.
29