Schedule; Weekdays And Holidays - Bosch DIVAR 2000 Operation Manuals

42 en | Settings
6.5

Schedule

Here you can plan and set up schedules for efficient use of the channels while effectively
covering most recording needs. You can also assign holiday intervals.
6.5.1

Weekdays and Holidays

Weekdays
Recording is scheduled in a weekly calendar, with the possibility to change the behavior of
each day for a maximum six different time periods (this is useful for weekends or nights). This
calendar is then repeated for subsequent weeks.
Different recording modes can be assigned
– Regular
– Motion (Motion Detection)
– Alarm
If you choose combined options, the system will not separately record if an MD or an alarm
occurs simultaneously
Each record mode changes the quality and frame rate settings according to their settings in
the menu Setting > Camera > Recorder. A mode is specified in intervals of 1 hour for each day
of the week.
When scheduled times are assigned, the record modes are graphically shown as color bands
on the bottom of the screen over the selected 24-hour period:
– green for regular recording
– yellow for Motion
– red for alarm recording
Edit a schedule
1. Select the required channel number (select "all" if you want to schedule all the channels).
2. If required, choose Pre record to start the video recording a few seconds before the
event occurred in the file (from 1 to 30 seconds depending on the bit stream).
3. If required, choose Snapshot to take a snapshot of the image when an alarm occurs (see
Recording, page 38 for more information on setting up the snapshot).
4. Choose Period - Monday to Sunday, or all (if the same period is required for each
weekday).
5. Enter the times required for different periods (maximum six) for different modes.
6. Assign the mode for each different time period - choose Regular, MD, Alarm and/or MD &
alarm.
7. If holiday(s) need to be added to the schedule, choose Holiday:
After completing the setup, click <OK> to save the settings and return to the previous menu.
Holidays
Use this tab to add holiday periods to the schedules:
1. Select the required channel number (select "all" if you want to schedule all the channels).
2. If required, choose Pre record to start the video recording a few seconds before the
event occurred.
3. Choose the record mode for the holiday period (Regular, Motion, Alarm).
4. Click <Add> to open a calendar for holiday periods.
5. Click on the required holiday periods (choose other months and years if required).
6. Select each Repeat steps 5 and 6 to assign the holiday settings.
2016.09 | v1.0 | AM18-Q0717 Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Bosch Security Systems