Wansview B Series User Manual page 8

http://www.wansview.com
1) Click 'Search (F3)';
2) Choose a camera;
3) Change the ip address of the ip camera according to the information in the red frame
on the left. The numbers in the red circle should not be the same. Http port should be
a number between 80~65535;
4) Enter user name and password for the device,
5) Click 'update';
6) After updating successfully, click "Search (F3)", choose the device again and click
"Browse (F4)". Then you can run the web browser, enter user name and password
and login IP camera to view the video, example of figure 3.
Notice：
1) Please check carefully the "Local PC information" in top left corner of the interface, if
the computer has several network cards, please selects the one you are using.
2) If you installed the firewall software in your PC, when you run the BSearch_en.exe, it
may pop up a window to say "whether you want to block this program or not", then
you should choose not to block。
3) The default ip address is 192.168.0.178 and default http port is 80。
We suggest using IE kernel browser to view the video
but user needs to install video player before viewing the video. Click "download and
install player (first use)" link, it will popup dialogue box as Figure 4, click Run, it will
download player and install automatically.
Figure 3 Interface for view video
the default is "admin" and
（it can provide more
"123456";
functions）,
7