If The Thread Breaks During Sewing - Brother 882-W07 Operational Manual

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
If the Thread Breaks During
Sewing
a
Press the "Start/Stop" button to stop the
machine.
b
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press
directions in steps
previous section to reset the bobbin.
c
Press .
d
Press the "Presser Foot Lifter" button to
lower the presser foot.
e
Press
→ The camera view window appears.
230
and follow the
a e
through from the
f
Press , , or
needle back the correct number of stitches
before the spot where the thread broke.
* If you cannot move back to the spot where the
thread broke, press
move to the beginning position of that color, then
use , , or
slightly before where the thread broke.
* Press to enlarge the image in the screen.
* Press to remove "
g
Press to close the camera view
window.
h
Press to return to the original screen.
i
Press the "Presser Foot Lifter" button to
lower the presser foot, and press the "Start/
Stop" button to continue sewing.
to move the
to select the color and
to move ahead to
" from the screen.