Overcasting; Overcasting Using Presser Foot "G - Brother 882-W07 Operational Manual

Overcasting

Use for the edge of seams in skirts or trousers, and the edge of all cuttings. Use presser foot "G", presser
foot "J", or the side cutter attachment depending on the kind of overcasting stitch you select.

■ Overcasting Using Presser Foot "G"

Stitch Stitch name
Overcasting stitch
Overcasting stitch
Overcasting stitch
a
Select a stitch and attach presser foot "G".
b
Lower the presser foot so that the presser
foot guide is set flush against the edge of the
fabric.
Presser
Applications
foot
Reinforcing of light and medium
weight fabrics
Reinforcing of heavyweight
fabric
Reinforcing of medium,
heavyweight and easily friable
fabrics or decorative stitching.
Stitch width
[mm (inch)]
Auto Manual
3.5 2.5 - 5.0
(1/8) (3/32 - 3/16)
5.0 2.5 - 5.0
(3/16) (3/32 - 3/16)
5.0 3.5 - 5.0
(3/16) (1/8 - 3/16)
c
Sew along the presser foot guide.
a Guide
CAUTION
• After the stitch width is adjusted, rotate the
handwheel toward you (counterclockwise).
Check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may break and cause injury.
a The needle should not touch the center bar
• If the presser foot is raised to its highest level,
the needle may strike the presser foot.
SEWING THE STITCHES
Stitch length
Twin
[mm (inch)]
needle
Auto Manual
2.0 1.0 - 4.0
NO
(1/16) (1/16 - 3/16)
2.5 1.0 - 4.0
NO
(3/32) (1/16 - 3/16)
2.5 1.0 - 4.0
NO
(3/32) (1/16 - 3/16)
3
105