Free Motion Quilting - Brother 882-W07 Operational Manual

SEWING THE STITCHES
Example: Changing the width
h
When you are finished sewing, set the
width control back to "OFF".

■ Free Motion Quilting

With free motion quilting, the feed dogs can be
lowered by pressing
moved freely in any direction.
For free motion quilting, use free motion quilting
foot "C" or free motion open toe quilting foot "O"
depending on the stitch that is selected, and set the
machine to free motion sewing mode. In this mode,
the presser foot is raised to the necessary height for
free motion sewing.
We recommend attaching the foot controller and
sewing at a consistent speed. You can adjust the
sewing speed with the speed control slide on the
machine.
Using Free motion Quilting Foot "C"
Use the free motion quilting foot "C" with straight
stitch needle plate for free motion sewing.
Free motion quilting foot "C"
• With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
• When using free motion quilting foot "C", be
sure to use the straight stitch needle plate and
sew with the needle in middle (center) needle
position. If the needle is moved to any position
other than the middle (center) needle position,
the needle may break, which may result in
injuries.
116
, so that the fabric can be
CAUTION
Memo
• When starting to sew, the internal sensor
detects the thickness of the fabric, and the
quilting foot is raised to the height specified
in the machine settings screen. Press
to display "Free Motion Foot
Height" on 2/8 of the settings screen. Press
or to select the height that the
quilting foot is raised above the fabric.
Increase the setting by pressing
example, when sewing very stretchy fabric,
so that it is easier to sew.
• In order to sew with a balanced tension, it
may be necessary to adjust the upper thread
tension. Test with a sample piece of fabric
that is similar to your chosen fabric.
a
Attach the straight stitch needle plate (see
page 97).
a Round hole
Memo
• Notice this needle plate has a round hole for
the needle.
b
Select or
, for
.