Brother 882-W07 Operational Manual page 332

ENTERING STITCH DATA
e
Select whether one stitch or three stitches
will be sewn between the first two points.
* To sew three stitches, press the key so that it appears
as .
f
Use to move
and press
g
Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.
* Press to delete a selected point entered.
* Press
* Press
330
to the second point
.
to sew a test-run of the stitch.
to return to the original screen.
* Press to view an image of the stitch.
Memo
• If you have entered points that are too close
together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.
• If the stitch design is to be repeated and
linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.
a Linking stitches
• You can touch on the grid sheet to set the
point, or you can also use a USB mouse.