Brother 882-W07 Operational Manual page 189

b
Press to lock all keys and buttons.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
c
Raise the presser foot lever.
d
Push the black button on the presser foot
holder and remove the presser foot.
a
b
a Black button
b Presser foot holder
→ Remove the presser foot from the presser foot
holder.
e
Use the included screwdriver to remove the
screw of the presser foot holder, then
remove the presser foot holder.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
→ Remove the screw and presser foot holder.
Note
• Instead of simply loosening the screw, it
must be temporarily removed, while optional
embroidery foot "W" can be installed simply
by loosening the screw.
f
Position the embroidery foot "W2" on the
presser foot bar from behind.
a Presser foot bar
g
Hold the embroidery foot in place with
your right hand, and then use the included
screwdriver to securely tighten the presser
foot holder screw.
a Presser foot holder screw
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the presser foot holder. If the
screw is loose, the needle may strike the
presser foot and possibly cause injury.
BEFORE EMBROIDERING
5
187