Installing An Exflash 1.8-Inch Drive Cage And Backplane - IBM System x3850 X5 Installation And User Manual

18. Install the ServeRAID adapter onto the RAID adapter carrier, and then install
19. Install the top cover bracket (see "Installing the top-cover bracket" on page
20. Push the hard disk drives and hard disk drive fillers back into place so that
21. Install the top cover.
22. Connect the cables and power cords (see "Connecting the cables" on page 79).
23. Turn on all attached devices and the server.
24. (IBM Business Partners only) Complete the additional steps in "Instructions

Installing an eXFlash 1.8-inch drive cage and backplane

To confirm that the server supports the drive cage and backplane that you are
installing, see http://www.ibm.com/systems/info/x86servers/serverproven/
compat/us/.
Use the following instructions to install an eXFlash 1.8-inch drive cage when a
2.5-inch SAS hard disk drive backplane is also installed in the server.
To install an eXFlash 1.8-inch drive cage and backplane, complete the following
steps:
58
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Installation and User's Guide
the carrier into the server.
Post
Tabs
46).
they connect to the backplane.
for IBM Business Partners" on page 29.
1. Read "Safety" on page v and "Installation guidelines" on page 38.
Release
latch