IBM System x3850 X5 Installation And User Manual page 31

A thumbscrew is in this position only
when a 2-node lock bracket is installed
(2-node Scalability Kit Option)
QPI QPI
Link 1 Link 2
LED LED
Power on
LED
System
error LED
AC power LED: Each hot-swap power supply has an ac power LED and a dc
power LED. When the ac power LED is lit, it indicates that sufficient power is
coming into the power supply through the power cord. During typical operation,
both the ac and dc power LEDs are lit. For any other combination of LEDs, see the
Problem Determination and Service Guide.
DC power LED: Each hot-swap power supply has a dc power LED and an ac
power LED. When the dc power LED is lit, it indicates that the power supply is
supplying sufficient dc power to the system. During typical operation, both the ac
and dc power LEDs are lit. For any other combination of LEDs, see the Problem
Determination and Service Guide.
Error LED: When the power-supply error LED is lit, it indicates that the power
supply has failed. See the Problem Determination and Service Guide for detailed
information about power-supply errors.
QPI link LEDs 1 - 4: When the QuickPath Interconnect (QPI) link LEDs are lit,
they indicate that the QPI links are fully established.
Table 3. QPI link LEDs
Link LEDs
Off
On
AC
DC
!
AC
AC
DC
DC
!
!
QPI
Link 3
LED
Locator
LED
Number of nodes
1
1
Chapter 1. The System x3850 X5 and x3950 X5 server
AC power LED
(green)
DC power LED
(green)
Error LED
(amber)
AC
DC
!
QPI
Link 4
LED
QPI wrap card or cable
status
None installed
Wrap card installed, working
17