802.1P Default Priority - D-Link DGS-3024 Manual

DGS-3024 Gigabit Ethernet Switch Manual
trigger the storm traffic control measures. The Threshold value can be set from 10 to 15000 packets per second. The default
setting is 15000. The settings of each port may be viewed in the Traffic Control Information Table in the same window.
To configure the Storm Control Type Setting, select the desired Storm Control Type from the pull-down menu, select the
threshold from the drop-down menu, and click Apply.
To configure the Traffic Control Setting, select the beginning and ending ports by using the From/To pull-down menu. Now,
change the Traffic control State to Enabled and click Apply.

802.1p Default Priority

The Switch allows the assignment of a default 802.1p priority to each port on the Switch. In the Configuration folder open
the QoS folder and click 802.1p Default Priority, to view the window shown below.
Figure 7- 40. Port Default Priority assignment window
66