Advanced; Digital Input/Output - D-Link DVS-210-1 User Manual

This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface
for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors and alarm
relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.
Select D/I or D/O
The Video Encoder will send a signal when an event is triggered,
Mode:
depending upon the type of device connected to the DI circuit.
N.C. stands for Normally Closed. This means that the normal
state of the circuit is closed. Therefore events are triggered when
the device status changes to "Open."
N.O. stands for Normally Open. This means that the normal state
of the circuit is open. Therefore events are triggered when the
device status changes to "Closed."
LED: You may specify whether or not to illuminate the LED on the side
of the Video Encoder.
D-Link DVS-210-1 User Manual

Advanced

Digital Input/Output

D/I and D/O
Pin Block
39