D-Link DMC-1002 Manual

D-Link DMC-1002 Manual

Snmp module for chassis-based media converter
Hide thumbs Also See for DMC-1002:

Advertisement

Quick Links

DMC-1002
SNMP Module for
Chassis-Based Media Converter
Manual
Rev. 01 (JUN. 2003)
1907MCB10016001
RECYCLABLE

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DMC-1002

  • Page 1 DMC-1002 SNMP Module for Chassis-Based Media Converter Manual Rev. 01 (JUN. 2003) 1907MCB10016001 RECYCLABLE...
  • Page 2: Table Of Contents

    ABLE OF ONTENTS ABOUT THIS GUIDE ..............2 ......................2 EATURES ....................2 NPACKING CONFIGURING THE SYSTEM .......... 3 ...........3 EDIA ONVERTER HASSIS SYSTEM ............3 NSTALLING THE ANAGEMENT ODULE ............4 ONFIGURE THROUGH EB BROWSER ...............4 ONFIGURATION VIA ERIAL SNMP M ..............5 UPPORT ANAGEMENT LED I ..................5...
  • Page 3: About This Guide

    BOUT UIDE This manual shows you how to configuring your DMC-1002 SNMP Module for Chassis-Based Media Converter. Features Compliant with IEEE802.3u 100BASE-TX standards Enable to monitor the module through terminal emulation program and Web browser The network administrator can access management software by...
  • Page 4: Configuring The System

    ONFIGURING YSTEM This chapter provides network managers and system administrators with information about how to configure the Media Converter Chassis system. The reader of this document should be knowledgeable about network devices, device configuration, network management, and Internet browsers. The user is assumed to be a network administrator or manager with an understanding of network operations.
  • Page 5: Configure Throughw

    Configure through Web browser The Media Converter chassis system is accessible using a Web browser (IE explorer, Netscape Communications, etc.) to open up the chassis monitoring system. The default IP Address for the chassis system is “192.168.1.1”, and the default Login name and password is both “root”. Configuration via Serial Port The Media Converter chassis system can be accessible using a terminal or terminal emulator attached to the RS232 serial port on the Switch too.
  • Page 13 Cold Start trap: to set the trap for rebooting the device (default = enable). Authentication Fail Trap: to set the warning trap when the community name of the device and workstation are different (default = enable) Power Fail Trap: to set the Power Fail Trap (default = enable).
  • Page 21: When Forgot The Password

    Trap Community Name: to authorize the device trap community name (default = public). Trap Host IP Address: to set the trap host IP address (same as monitoring station IP address). Cold Start trap: to set the trap for rebooting the device (default = enable).

Table of Contents