Network Setup - D-Link DVS-210-1 User Manual

Use this section to configure the network connections for your Video Encoder. All relevant information must be entered accurately.
LAN Settings:
Settings for your local area network.
DHCP:
Select this connection if you have a DHCP server running on your
network and would like your Video Encoder to obtain an IP address
automatically.
Static IP
You may obtain a static or fixed IP address and other network
Address:
information from your network administrator for your Video Encoder.
A static IP address may simplify access to your Video Encoder in
the future.
IP Address:
Enter the fixed IP address in this field.
Subnet Mask:
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
Default Gateway:
The gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
Primary DNS:
The primary domain name server translates names to IP addresses.
Secondary DNS:
The secondary DNS acts as a backup to the primary DNS.
Enable UPnP:
Enabling this setting allows your Video Encoder to be configured as
a UPnP device on your network.
Enable UPnP
Enabling this setting allows the Video Encoder to add port forwarding entries into the router automatically on a UPnP
Port Forwarding:
capable network.
D-Link DVS-210-1 User Manual

Network Setup

22