In this section, you may backup, restore and reset the Video Encoder configuration, or reboot the device.
Save To Local
You may save and document your current settings into your
Hard Drive:
computer.
Locate a pre-saved configuration by clicking Browse and
Local From Local
then restore the pre-defined settings to your Video Encoder
Hard Drive:
by clicking Load Configuration.
Restore to
You may reset your Video Encoder and restore the factory
Factory Default:
settings by clicking Restore Factory Defaults.
Reboot Device:
This will restart your Video Encoder.
D-Link DVS-210-1 User Manual
Backup and Restore
44