Life Fitness 3500 Manual page 14

14
Step 10
Plug the 12-PIN CONNECTOR of the WIRE HARNESS protruding from the top of the
MONOCOLUMN into the corresponding PC BOARD CONNECTOR located on the back
of the DISPLAY CONSOLE. Once connected, feed the excess cable carefully back into
the top of the MONOCOLUMN and lower the CONSOLE into position on the MONO-
COLUMN. Secure the CONSOLE to the MONOCOLUMN with the two SCREWS.
Step 11
Place the magnet side of the STOP KEY in the space provided on the face of the DIS-
PLAY CONSOLE. Check to ensure that the ON/OFF switch, located next to the POWER
CORD point of entry, is in the OFF (O) position. Plug the treadmill POWER CORD into a
properly grounded outlet and change the switch setting to the ON (I) position.