Operating Adjustments; The Control Panel; Control Panel Menu Structure - Blizzard Lighting SnowBlind User Manual

4. OPERATING ADJUSTMENTS

The Control Panel

All the goodies and different modes possible with the SnowBlind™ are accessed
by using the control panel on the side of the fixture. There are 4 control
buttons below the LED display which allow you to navigate through the various
control panel menus.
<MODE>
Is used to navigate the various modes.
<SETUP>
Is used to enter into the selected mode setup.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
The control panel display shows the menu items listed. Pushing the <MODE>
button repeatedly will scroll through the menu settings. To edit one, push the
<SETUP> button. Then use the <UP/DOWN> buttons to scroll through your
choices (if applicable). Push the mode button to confirm your choice.

Control Panel Menu Structure

CON
SE-
*Note: The rear sensitivity knob must be turned up (clockwise) for the control panel settings will function.
Also, for the knob to function, the menu settings must not be set to off (SE.0).
SLA
d--
Snowblind User Manual Rev. C
MODE SETUP
000 - 255
F.00 - F.30
SE.0 - SE.9
001 - 255
Page 12
UP DOWN
Brightness Control (Low <--> High)
Sets the Strobe Speed (Slow <--> Fast)
Sound Active, Mic Sensitivity (0-9, 0=off)
Sets Fixture to Slave Mode
Selects the Starting DMX Channel
© 2021 Blizzard Lighting, LLC